Fujitsu ETERNUS DX400 S2 Series Konfigurationshandbuch - Seite 26
Blättern Sie online oder laden Sie pdf Konfigurationshandbuch für Lagerung Fujitsu ETERNUS DX400 S2 Series herunter. Fujitsu ETERNUS DX400 S2 Series 38 Seiten. Server connection. (fibre channel) for aix
Seite drucken
Chapter 9
Checking Connections
9.3
Setting Logical Units
(Example for the ETERNUS DX8900 S4 and ETERNUS DX8700 S3/DX8900 S3)
#lsdev -Cc disk
hdisk0 Available 1S-08-00-8,0 16 Bit LVD SCSI Disk Drive
hdisk1 Available 1S-08-00-9,0 16 Bit LVD SCSI Disk Drive
hdisk2 Available 11-08-02-01 ETERNUS_DXH - Fujitsu Storage Systems ETERNUS
(Example for the ETERNUS DX400 S2 series)
#lsdev -Cc disk
hdisk0 Available 1S-08-00-8,0 16 Bit LVD SCSI Disk Drive
hdisk1 Available 1S-08-00-9,0 16 Bit LVD SCSI Disk Drive
hdisk2 Available 11-08-02-01 ETERNUS_DX400 - Fujitsu Storage Systems ETERNUS
(Example for the ETERNUS DX8000 S2 series)
#lsdev -Cc disk
hdisk0 Available 1S-08-00-8,0 16 Bit LVD SCSI Disk Drive
hdisk1 Available 1S-08-00-9,0 16 Bit LVD SCSI Disk Drive
hdisk2 Available 11-08-02-01 ETERNUS_DX8000 - Fujitsu Storage Systems ETERNUS
9.3
Setting Logical Units
Set the parameters for the LUNs that are recognized by the VIOS.
The following procedure is only required when a virtual SCSI connection is used.
Perform the following procedure using the padmin user account.
1
Use the "chdev" command to set the reserve policy.
Enter the hdisk number to set for "N".
$ chdev -dev hdiskN -attr reserve_policy=no_reserve
2
Use the "lsdev" command to check the configured settings.
Enter the hdisk number to set for "N".
$ lsdev -dev hdiskN -attr
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX
26
Copyright 2018 FUJITSU LIMITED
P3AM-3782-23ENZ0