Brother MFC-9320CW Handbuch zum Anschluss - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch zum Anschluss für Druck-Server Brother MFC-9320CW herunter. Brother MFC-9320CW 6 Seiten. Vista network connection repair instructions
Auch für Brother MFC-9320CW: Technische Daten (6 seiten), Handbuch zur Schnelleinrichtung (47 seiten), Handbuch zur Schnelleinrichtung (49 seiten)

Seite drucken

Brother MFC-9320CW Handbuch zum Anschluss

MFC9320CW Vista Network Connection Repair Instructions

2. While in the Printers folder, right click on the Brother driver and left click on PROPERTIES.

3. Click PRINT TEST PAGE. If the test page prints, then the issue is resolved. If the test page

does not print, click OK and close the PRINTER PROPERTIES window and continue to the

next step.

4. Right click on the printer, then left click on CANCEL ALL DOCUMENTS. Once the documents

are cleared, continue to PART 9 to verify the driver port.

PART 9: CONFIGURE THE DRIVER PORT SETTINGS:

1. While in the Printers folder right click on the Brother driver and left click on PROPERTIES.

The Brother printer driver properties screen will now appear.

2. Click the PORTS tab.

3. You will see a list of the available communication ports on your PC (Ex: LPT1:, LPT2:,

COM1:, ETC)

4. Click ADD PORT.

5. Choose STANDARD TCP/IP PORT then click NEW PORT. The Standard TCP/IP Printer Port

Wizard will appear.

6. Click NEXT.

7. In the field labeled PRINTER NAME OR IP ADDRESS, type the IP address of your Brother

machine noted earlier.

NOTE: If you receive an error stating that a port with that name already exists, click

OK. Then in the PORT NAME field, slightly modify the auto-filled name of the port.

For example, change the port name from IP_192.168.1.100 to IP_192.168.1.100a.

(Note: The actual port name will depend on the IP address for your Brother

machine).

8. a. If you receive a window requesting ADDITIONAL PORT INFORMATION, then the

computer is not communicating properly with the Brother machine. Some common causes are

Firewalls and security applications, a Conflict with another application running on the

computer, or an IP conflict with another device on the network. Try to troubleshoot or

eliminate as many of these factors as possible. Contact your computer manufacturer or

network admin to further troubleshoot network communication conflicts.

b. If you receive a window stating: Completing the Add Standard TCP/IP Printer Port

Wizard, look for the section labeled ADAPTER TYPE. If the communication is successful,

this section should indicate that the computer is communicating with a Brother Print Server or

will list the node name of the Brother machine (displayed as BRN or BRW followed by a

combination of letters and numbers.) Click FINISH.

9. Click CLOSE -> APPLY.

10. Click on the GENERAL TAB.

11. Click PRINT TEST PAGE. If the test page prints, then the issue is resolved. If the test page

does not print, click OK and close the PRINTER PROPERTIES window. Right click on the