AEG 66000I Betriebs- und Installationsanleitung - Seite 19

Blättern Sie online oder laden Sie pdf Betriebs- und Installationsanleitung für Kühlschrank AEG 66000I herunter. AEG 66000I 28 Seiten. Aeg refrigerator user manual

Seite drucken

Starting up and temperature regulation

Connect the appliance to the mains electricity supply.

When the refrigerator compartment door is opened, the internal light-

ing is switched on.

The temperature selector knob is located on the right hand side of the

refrigerator compartment.

Setting "0" means: Off.

Turning clockwise in direction "1":

Refrigerating unit on, the latter then

operating automatically.

Setting "1" means:

Hightest temperature, warmest set-

ting.

AEG62

Setting "6" (end-stop) means:

Lowest temperature, coldest setting.

At a low ambient temperature of around 16°C, setting "1" should be

selected. At ambient temperatures of around 25°C, select setting "2". If

you require a lower temperature, select setting "3" or "4".

Important!

High ambient temperatures (e.g. on hot summer days) and a cold set-

ting on the thermostat (position"5" to "6") can cause the compressor

to run continuously.

Reason: when the ambient temperature is high, the compressor must

run continuously to maintain the low temperature in the appliance.

The fridge will not be able to defrost since automatic defrosting of the

fridge is only possible when the compressor is not running (see also

"Defrosting" section). The result is the build up of a thick layer of frost

on the fridge rear wall.

If this happens, turn the thermostat knob back to a warmer setting

(position "3" to "4"). At this setting the compressor will be switched on

and off as usual and automatic defrosting recommenced.