Brother MFC-J615W Handbuch zur Schnelleinrichtung - Seite 30
Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Druck-Server Brother MFC-J615W herunter. Brother MFC-J615W 41 Seiten. Quick setup guide - spanish
Auch für Brother MFC-J615W: Anweisungen zum Anschluss (2 seiten), (Englisch) Kurzanleitung zur Konfiguration (40 seiten)
Seite drucken
For Wireless Network Users
Troubleshooting
IMPORTANT
Please do not contact Brother Customer Service for assistance without the wireless security
information. We cannot assist you in locating your network security settings.
How can I find the wireless security information (SSID and Network Key)
1) You should see the documentation provided with your wireless access point/router.
2) The initial network name could be the manufacturer's name or the model name.
3) If you do not know the security information, please consult the router manufacturer, your system
administrator, or internet provider.
* The Network Key may also be described as the Password, Security Key or Encryption Key.
Wireless LAN report
If the wireless LAN report that printed shows that the connection failed, check the error code on the printed report
and refer to the following instructions.
Error code
TS-01
TS-02
30
The wireless setting is not activated, turn the wireless setting to ON.
- If a LAN cable is connected to your machine, disconnect it and turn the wireless setting of
your machine to ON.
On your machine, press Menu.
Press a or b to choose Network and press OK.
Press a or b to choose Network I/F and press OK.
Press a or b to choose WLAN and press OK.
Press Stop/Exit.
The wireless access point/router cannot be detected.
1. Check the following 4 points.
- Make sure that the wireless access point/router is powered on.
- Move your machine to an obstruction-free area, or closer to the wireless access
point/router.
- Temporarily place your machine within about 3.3 feet (one meter) from the wireless access
point when you are configuring the wireless settings.
- If your wireless access point/router is using MAC address filtering, confirm the MAC
address of the Brother machine is allowed in the filter.
2. If you manually entered the SSID and security information (SSID/authentication
method/encryption method/Network Key), the information may be incorrect.
Reconfirm the SSID and security information and reenter the correct information as
necessary.
See How can I find the wireless security information (SSID and Network Key) on page 30 to
confirm.
Recommended Solutions