Brother NC-8100h Handbuch zur schnellen Netzwerkeinrichtung - Seite 5
Blättern Sie online oder laden Sie pdf Handbuch zur schnellen Netzwerkeinrichtung für Druck-Server Brother NC-8100h herunter. Brother NC-8100h 6 Seiten. Print/fax server
Seite drucken
Step 2: Connecting the NC-8100h to an Unshielded Twisted
Pair 10Base-T or 100Base-TX Ethernet Network
To connect the NC-8100h to a 10Base-T or 100Base-TX Network, you must have an Unshielded Twist Pair Cable.
One side of the cable must be connected to a free port on your Ethernet hub and the other side must be connected to
the 10Base-T or 100Base-TX connector (an RJ45 Connector) of the NC-8100h.
Verifying Successful hardware Installation:
Plug in the AC power cord. After initialization and warm-up (this may take several seconds), the machine will come
to a Ready state.
Step 3: Installing the BRAdmin Professional: Configuration
Utility
®
(For Windows
Note
If you have another operating system, refer to the NC-8100h User's Guide located on the CD-ROM
with your MFC.
1.
Insert the CD-ROM into your CD-ROM Drive.
2.
The installation screen will automatically load.
3.
If possible, select the model number and language that you use.
4.
Select Install Software.
5.
From the "Network Application for Optional NC-8100h" menu, select Install Software.
6.
From the "For Administrators" menu select BRAdmin Professional.
®
9x, NT
4.0, Windows
®
2000 and XP users only)
5