Brother CopyPoint PC Link Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Software Brother CopyPoint PC Link herunter. Brother CopyPoint PC Link 19 Seiten. Pc link manual - english

Seite drucken

Convenient Scanning of what you write on the writing surface

Brother CopyPoint PC Link allows you to use the copyboard scanning mechanism

to scan in what you write on the writing surface into your PC. You can then store

and print these images at any time.

About This Manual

This manual assumes that you are familiar with the conventions in operating any

Windows

application, including how to use a mouse and Windows

terminology. PLEASE READ THE MANUAL AND SET UP YOUR BROTHER

COPYBOARD BEFORE YOU INSTALL COPYPOINT PC LINK.

We suggest that you carefully read Chapter 1: Setting Up the Copyboard and

Computer to Work Together and Chapter 2: Using ScanSoft

ScanSoft

TextBridge

Brother fax-back system

Brother Technical Support has installed an easy to use fax-back system so you

can get instant answers to common technical questions and product information

on all Brother products. This system is available 24 hours a day, 7 days a week.

You can use this system to send faxes to any fax machine, not just to the one from

which you are calling.

Please call 1-800-521-2846 and follow the voice prompts to receive faxed

instructions on how to use the system and the Index of Fax-Back

Connecting the Brother Copyboard to the computer

Follow the instructions below to hook up the CopyPoint PC Link Cable.

1) Position your Brother Copyboard near your personal computer CPU

(maximum distance of approximately 5-6 feet).

2) Make sure the power to both machines is switched off.

3) Remove the black cover on the PC I/F terminal at the left side of your

Brother Copyboard. Connect the RJ-8 connector of the CopyPoint PC Link

Cable in the jack.

4) Connect the 25-pin female RS-232 connector of the Cable to your PC in

an available male serial communications port. Use the 9-pin adapter if

your PC requires it. (See your PC owner's manual for the correct interface

port for connection.) NOTE: If your PC is an IBM Aptiva, an MWAVE

card is using COM1. You must connect the CopyPoint PC Link Cable

to another COM serial port that is available.

i i

I N T R O D U C T I O N

before you try to use CopyPoint PC Link.

filing

PaperPort

and

subjects.