Brother MFC-6890CDW - Color Inkjet - All-in-One Handbuch zur Schnelleinrichtung - Seite 28
Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Software Brother MFC-6890CDW - Color Inkjet - All-in-One herunter. Brother MFC-6890CDW - Color Inkjet - All-in-One 47 Seiten. Quick setup guide - spanish
Auch für Brother MFC-6890CDW - Color Inkjet - All-in-One: Broschüre & Specs (9 seiten), Handbuch zur Schnelleinrichtung (49 seiten), Spezifikationen (2 seiten), (Englisch) Kurzanleitung zur Konfiguration (48 seiten)
Seite drucken
For Wireless Network Users
For Wireless Network Interface Users
14
Before you begin
First you must configure the wireless network settings of your machine to communicate with your network
router/access point. After the machine is configured to communicate with your router/access point, computers on
your network will have access to the machine. To use the machine from these computers, you will need to install
the drivers and software. The following steps will guide you through the configuration and installation process.
To achieve optimum results with normal everyday document printing, place the Brother machine as close to the
network router/access point as possible with minimal obstructions. Large objects and walls between the two
devices as well as interference from other electronic devices can affect the data transfer speed of your documents.
Although the Brother MFC-6890CDW can be used in both a wired and wireless network, only one of the
connection methods can be used at a time.
Important
If you have previously configured the wireless settings of the machine you must reset the network
(LAN) settings before you can configure the wireless settings again.
On your machine, press MENU. Press a or b to display Network and press Network.
Press a or b to display Factory Reset, and then press Factory Reset.
Press Yes to accept. Hold down Yes for 2 seconds to confirm.
Note
The following instructions are for infrastructure mode.
To set up your machine in any other wireless environment you can find instructions in the Network User's
Guide on the CD-ROM.
You can view the Network User's Guide by following the instructions below.
1 Turn on your computer. Insert the Brother CD-ROM into your CD-ROM drive.
®
For Windows
:
2 Choose your model and the language. The CD-ROM main menu will appear.
3 Click Documentation, and then click HTML documents.
®
For Macintosh
:
2 Double-click Documentation, and then double-click your language folder.
3 Double-click top.html.
Infrastructure Mode
Router/Access Point
a
Wireless Network machine (your machine)
b
Wireless capable computer connected to the access point
c
Wired computer connected to the access point
d
28
4
3
1
2