Brother MFC-8460N Setup-Handbuch - Seite 12

Blättern Sie online oder laden Sie pdf Setup-Handbuch für Software Brother MFC-8460N herunter. Brother MFC-8460N 23 Seiten. Scan to ftp (file transfer protocol)
Auch für Brother MFC-8460N: Benutzerhandbuch (8 seiten), Handbuch zur Schnelleinrichtung (41 seiten), Handbuch (7 seiten), Handbuch zur Schnelleinrichtung (37 seiten)

STEP 2

Installing the Driver & Software

For Network Interface Users

The installation steps for the MFL-Pro Software Suite and drivers will depend on your model number.

Please check the table below for the correct installation method for your model.

Model Number

MFC-440CN, MFC-5460CN, MFC-5860CN

DCP-8065DN, MFC-7225N, MFC-7820N, MFC-8460N, MFC-8860DN

For MFC-440CN, MFC-5460CN and MFC-5860CN

users

Important

Make sure that you have finished the

instructions from STEP 1 Setting Up the

Machine in the Quick Setup Guide.

Note

• Please close any applications running before

installing MFL-Pro Suite.

• If your machine has media drives (slots), make

sure there are no memory cards in the media drive

of the machine.

(The illustrations are based on MFC-5460CN.)

Turn off and unplug the machine from the AC

outlet and from your network, if you already

connected an interface cable.

Using both hands, use the plastic tabs on both

sides of the machine to lift the scanner cover

until it locks securely into the open position.

Page Number

page 10

page 14

Insert the network cable into the LAN socket

marked with a

LAN socket inside the machine on the left as

shown below.

Carefully route the network cable through the

trench and out the back of the machine.Then,

connect the cable to your network.

Improper Setup

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Note

If both USB and LAN cables are being used, guide

both cables through the trench with one on top of

the other.

Windows

symbol. You will find the