Fujitsu FI-6230 Reinigung und Wartung - Seite 8

Blättern Sie online oder laden Sie pdf Reinigung und Wartung für Drucker Fujitsu FI-6230 herunter. Fujitsu FI-6230 47 Seiten. Color duplex workgroup scanners
Auch für Fujitsu FI-6230: Handbuch "Erste Schritte (20 seiten), Broschüre & Specs (2 seiten), Gebrauchsanweisung (10 seiten), Erste Schritte (23 seiten)

Seite drucken
Fujitsu FI-6230 Reinigung und Wartung

Plastic roller

Lightly clean the Plastic roller taking care not to damage the roller surface. Take particular care when cleaning this
roller as black debris on it affects document pick performance. Be careful not to damage the sponges attached around
the middle of the roller.

Glass

Clean lightly.
HINT
If the glass is dirty, vertical streaks may apper in the scanned images.

Ultrasonic sensor

Clean lightly with a dry cloth.
With the movie below, review the procedure to clean the Brake roller, Pick roller, Plastic roller, and ADF glass surfaces:

Feed roller/Eject roller

1) Open the ADF when the indication of the Function Number display is not "P" or "0".
If you open the ADF when the indication of the Function Number display is "P" or "0", the Feed rollers/Eject rollers
will not rotate even you perform the operation of step 2 below.
2) Simultaneously hold down the [Send to] and [Scan] buttons on the Operator Panel.
The Feed rollers/Eject rollers start to rotate slowly.
3) Hold a soft cloth moistened with cleaning fluid against the surface of the rotating Feed rollers so that it lightly
cleans the surface of the rollers. Take particular care when cleaning these rollers as black debris on these rollers
affects pickup performance. As a guideline, seven presses of the [Send to] and [Scan] buttons make the Feed
rollers/Eject rollers to rotate one full turn.