Brother MFC-8710DW Handbuch zur Schnelleinrichtung - Seite 32
Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Software Brother MFC-8710DW herunter. Brother MFC-8710DW 45 Seiten. Quick setup guide - english
Auch für Brother MFC-8710DW: Handbuch (30 seiten), Handbuch (36 seiten), Handbuch zur Schnelleinrichtung (45 seiten), Benutzerhandbuch (23 seiten), Handbuch zur Produktsicherheit (23 seiten)
Seite drucken
For Wireless Network Users
One push setup using WPS (Wi-Fi Protected Setup) or AOSS™
(Windows
21
Configure the wireless
settings
a
Confirm your wireless access point/router has
the WPS or AOSS™ symbol as shown below.
b
Place the Brother machine within range of your
WPS or AOSS™ access point/router. The
range may differ depending on your
environment. Refer to the instructions provided
with your wireless access point/router.
If you began the wireless setup from step 5 on
page 7, press 3 to choose WPS/AOSS.
Then go to d.
All other users, go to c.
c
On your machine, press Menu, 7 (Network),
2 (WLAN), 3 (WPS/AOSS).
d
When WLAN Enable ? is displayed, press a
or b to choose On and press OK. This will start
the wireless setup wizard.
Otherwise press Stop/Exit to exit from the
wireless setup wizard.
e
When Start WPS/AOSS on your
wireless access point/router.
appears, press the WPS or AOSS™ button on
your wireless access point/router. See the
user's guide for your wireless access
point/router for instructions. And then press
OK.
This feature will automatically detect which
mode (WPS or AOSS™) your wireless access
point/router uses to configure your machine.
32
®
and Macintosh)
Note
If your wireless access point/router supports WPS
(PIN Method) and you want to configure your
machine using the PIN (Personal Identification
Number) Method, see Configuration using the
PIN Method of WPS (Wi-Fi Protected Setup) in
the Network User's Guide.
f
A connection result message appears on the
LCD and a WLAN report will automatically be
printed.
If the connection failed, check the error code on
the printed report and refer to
Troubleshooting on page 33.
Wireless setup is now complete. A four
level indicator at the top right of your
machine's LCD will show the wireless
signal strength of your wireless access
point/router.
To install the MFL-Pro Suite, continue to
step 22.
®
For Windows
Users:
Now go to
page 37
For Macintosh Users:
Now go to
page 39