Fujitsu fi-760PRB Benutzerhandbuch - Seite 21

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Drucker Fujitsu fi-760PRB herunter. Fujitsu fi-760PRB 25 Seiten. Imprinter

Seite drucken

Chapter 5 Error Messages

This chapter explains the imprinter error messages.

Error codes and error messages are displayed on the LCD. Refer to the error codes and the error messages that are

displayed for troubleshooting.

HINT

For details on the error messages and other errors, refer to the Operator's Guide provided with the scanner.

Error Code

Paper jam (Imprinter)

J1:5A

Imprinter Cover Open

U5:4A (*1)

Print cartridge not installed

U6:B4

Imprinting area error

U7:B9

Imprinter error (communication timeout)

A1:B3

Imprinter error (EEPROM)

A3:B6

Imprinter error (ROM)

A4:B8

Imprinter error (print head)

A2:B5

Imprinter system error

H6:B1

*1: When you open the imprinter print section while the scanner is in standby, only an error message will appear without

an error code. Also, note that buttons on the operator panel are disabled while the imprinter print section is open.

Error Details

Try the following:

1. Remove the jammed document from the imprinter.

2. Make sure that the document is an appropriate one for scanning

with the imprinter.

3. Clean the rollers.

Close the print section of the imprinter, and load the document again.

No print cartridge is installed.

Check if the print cartridge is installed correctly.

Adjust the imprinting start position and the imprinter strings to fit the

imprinting area in the document.

An error occurred in the imprinter.

Try the following:

1. Confirm that the EXT cable of the imprinter is connected properly

to the EXT connector on the back of the scanner.

2. Check if the print cartridge is installed correctly.

3. Turn the scanner off then back on.

If the problem persists, write down the displayed error code and

contact your FUJITSU scanner dealer or an authorized FUJITSU

scanner service provider.

An error occurred in the imprinter.

Try the following:

1. Confirm that the EXT cable of the imprinter is connected properly

to the EXT connector on the back of the scanner.

2. Check if the print cartridge is installed correctly.

3. If you have a new print cartridge, replace the old print cartridge with

the new one.

4. Turn the scanner off then back on.

If the problem persists, write down the displayed error code and

contact your FUJITSU scanner dealer or an authorized FUJITSU

scanner service provider.

An error occurred in the imprinter.

Turn the scanner off then back on.

If the problem persists, write down the displayed error code and

contact your FUJITSU scanner dealer or an authorized FUJITSU

scanner service provider.

Action