Configuration for Scan to Network using a Web Browser
Synchronize with SNTP server
You must configure the SNTP protocol (network time server), or you must set the date, time and time zone
correctly on the control panel for Kerberos Authentication. The time must match the time used by the
Kerberos Server.
SNTP is the protocol used to synchronize the time used by the machine for Authentication with the SNTP
time server (this time is not the time displayed on the LCD of the machine). You can synchronize the time
used by the machine on a regular basis with the Coordinated Universal Time (UTC) provided by the SNTP
time server.
Note
This function is not available in some countries.
a
Start your web browser.
b
Type "http://machine's IP address/" into your browser's address bar (where "machine's IP address" is the
IP address of the machine or the print server name).
For example: http://192.168.1.2/
c
No password is required by default. If you have previously set a password, enter it and press
d
Click Network, and then click Protocol.
e
Select the SNTP check box to activate the setting.
f
Click Advanced Setting.
Status
Displays whether the SNTP server settings are enabled or disabled.
SNTP Server Method
Choose AUTO or STATIC.
• AUTO
If you have a DHCP server on your network, the SNTP server will automatically obtain the address
from that server.
• STATIC
Enter the address you want to use.
Primary SNTP Server Address, Secondary SNTP Server Address
Enter the server address (up to 64 characters).
The Secondary SNTP server address is used as a backup to the Primary SNTP server address. If the
Primary server is unavailable, the machine will contact the Secondary SNTP server. If you have a
Primary SNTP server, but no Secondary SNTP server, simply leave this field blank.
2
2
.
6
Seite drucken