Fujitsu FTP-622MCL301 Spezifikationsblatt - Seite 3
Blättern Sie online oder laden Sie pdf Spezifikationsblatt für Drucker Fujitsu FTP-622MCL301 herunter. Fujitsu FTP-622MCL301 6 Seiten. 24v drive, ultra high speed line thermal printer 2” mechanism, with cutter
Seite drucken
(Continued)
Item
Part number
Interface
For head
Power supply
For motor
For cutter
For logic
Mechanism (cutter)
Dimensions
Interface board
Weight (Mechanism+Cutter)
Mechanism
Expected life
Cutter
Operating temperature
Environmental
Operating humidity
conditions
Storage temperature
Storage humidity
Head temperature
Detection
Paper out/Mark detect
Head-up
Recommended thermal sensitive paper
*1: There may be exceptions.
*2: 24VDC, minimum head resistance.
*3: Guarantee: +5 C ~+40 C.
FTP-622MCL301/302
Centronics (ESC/POS
TM
), RS232C
24VDC
5%, Voltage
* 2
Current : average
( ): Peak
0.87 (1.16) A (at 80 mm/s printing speed, 25% printing ratio)
0.63 (1.16) A (at 50 mm/s printing speed, 25% printing ratio)
0.58 (0.58) A (at 30 mm/s printing speed, 25% printing ratio)
24VDC
5%, 1.0 A maximum
24VDC
5%, 1.0 A maximum
5VDC
5%, 0.5 A maximum
101 (W) 70 (D) 42 (H) mm (w/cutter)
131 (W)
89 (D)
24 (H) mm
approximately 300 g (w/cutter)
8
Pulse durability : 1
10
pulse/dot (using Fujitsu's standard
driving method)
Wear resistance: 50 km (at 25% printing ratio)
5
3
10
cuts
* 3
0 to +50 C
20 to 85% RH (no condensation)
–20 to +60 C (excluding paper)
5 to 95% RH (no condensation)
By thermistor (applied energy control, abnormal temperature detection)
By photointerrupter
By microswitch
For front insertion use (58 mm width)
For rear insertion use (60 mm width)
*Recommended papers
· Oji Paper
· NIPPON Paper
· MITSUBISHI Paper Mills
FTP-622MCL301/302
Specifications
: FTP-020PU001,FTP-020P0701
: FTP-020P0020,FTP-020P0702
: PD150R,PD160R,PD170R
: TF50KS-E,TF60KS-E,TF60KJ-R
: P220VBB-1,AFP-235
3