Brother MFC-J825DW Handbuch zur Schnelleinrichtung - Seite 35

Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für Software Brother MFC-J825DW herunter. Brother MFC-J825DW 45 Seiten. Quick setup guide - spanish
Auch für Brother MFC-J825DW: Handbuch (12 seiten), Handbuch (21 seiten), Handbuch zur Produktsicherheit (17 seiten), Web Connect Handbuch (22 seiten), Sicherheitshandbuch (17 seiten), Handbuch zur Schnelleinrichtung (42 seiten), Handbuch zur Fehlersuche (6 seiten), (Spanisch) Handbuch (21 seiten), (Spanisch) Handbuch (16 seiten), (Englisch) Kurzanleitung zur Konfiguration (44 seiten)

For Wireless Network Users

Troubleshooting

Please do not contact Brother Customer Service for assistance without the wireless security

information. We cannot assist you in locating your network security settings.

How can I find the wireless security information (SSID and Network Key)

1) You should see the documentation provided with your wireless access point/router.

2) The initial SSID could be the manufacturer's name or the model name.

3) If you do not know the security information, please consult the router manufacturer, your system

administrator, or internet provider.

* The Network Key may also be described as the Password, Security Key or Encryption Key.

If the wireless LAN report that printed shows that the connection failed, check the error code on the printed report

and refer to the following instructions.

Error code

The wireless setting is not activated, turn the wireless setting to ON.

- If a LAN cable is connected to your machine, disconnect it and turn the wireless setting of

your machine to ON.

TS-01

On your machine, press Menu.

Press Network.

Press a or b to display Network I/F.

Press Network I/F.

Press WLAN.

Press Stop/Exit.

The wireless access point/router cannot be detected.

1. Check the following 4 points.

- Make sure that the wireless access point/router is powered on.

- Move your machine to an obstruction-free area, or closer to the wireless access

point/router.

- Temporarily place your machine within about 3.3 feet (one meter) from the wireless

access point when you are configuring the wireless settings.

TS-02

- If your wireless access point/router is using MAC address filtering, confirm the MAC

address of the Brother machine is allowed in the filter.

2. If you manually entered the SSID and security information (SSID/authentication

method/encryption method/Network Key), the information may be incorrect.

Reconfirm the SSID and security information and re-enter the correct information as

necessary.

See How can I find the wireless security information (SSID and Network Key) on page 35 to

confirm.