Brother RuggedJet RJ-4040 Software-Handbuch - Seite 33
Blättern Sie online oder laden Sie pdf Software-Handbuch für Software Brother RuggedJet RJ-4040 herunter. Brother RuggedJet RJ-4040 48 Seiten. Mobile printer
Auch für Brother RuggedJet RJ-4040: Kurzreferenz-Handbuch (2 seiten), Benutzerhandbuch (33 seiten), Kurzreferenz-Handbuch (1 seiten), Benutzerhandbuch (34 seiten), Handbuch zur Produktsicherheit (22 seiten)
Seite drucken
M
Select compression mode
ASCII:
M
Hexadecimal: 4D
Parameters
Definitions of {n}
0
No-compression mode (Enabled)
1
Reserved (Disabled)
2
TIFF (Enabled)
Description
Selects the compression mode. Data compression is available only for data in raster graphic transfer.
[TIFF(Pack Bits)]
1-byte units
If the same data is repeated, the number of data units and that 1 byte of data are specified.
If different data is in a series, the number of data items and all of the different data are specified.
If the same data is repeated, the number of data units is specified as the actual number minus 1,
expressed as a negative number.
If different data is in a series, the number of data units is specified as the number of bytes minus 1,
expressed as a positive number.
If the above process results in more than 162 bytes of compressed data, the data is treated as being all
different. As a result, the data will be 163 bytes, including the 1 byte that specifies the data length.
Example
1 raster of raster graphics transfer:
Without compression:
With compression:
Since "00h" is repeated for 20 bytes, 20d -> 19d -> 13h changed into a negative number is EDh.
a.
Therefore: ED 00
Since "22h" is repeated for 2 bytes, 2d -> 1d -> 1h changed into a negative number is FFh.
b.
Therefore: FF 22
c.
The following 6 bytes remain unchanged. 6d -> 5d -> 5h
Therefore: 05 23 BA BF A2 22 2B
Continue for the remaining number of bytes for the uncompressed data. Even if 00h continues until the
end, it cannot be omitted.
{n}
{n}
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 22 22 23 BA BF A2 22 2B......
ED 00 FF 22 05 23 BA BF A2 22 2B ...
a
b
c
- 29 -
Raster Command Reference
4. Printing Command Details