Brother Wi-Fi Direct Handbuch - Seite 22

Blättern Sie online oder laden Sie pdf Handbuch für Software Brother Wi-Fi Direct herunter. Brother Wi-Fi Direct 24 Seiten.

Glossary

If you set Group Owner to On, your Brother machine serves as an access point when you configure a Wi-Fi

Direct network. The G/O assigns an SSID name, password and IP address for the Wi-Fi Direct network. The

default setting is Off.

Device Name

You can check the device name of the machine in the Wi-Fi Direct network environment. The device name

will be shown as **HL-xxxx or **MFC-xxxx (where xxxx is your model name and ** is the character string

assigned by your Brother machine).

SSID

This field displays the current Wi-Fi Direct network SSID name. The display shows up to 32 characters of the

SSID name.

IP Address

This field displays the current IP address of the machine assigned by the G/O.

Status

This field displays the current Wi-Fi Direct network status. When your machine is a G/O, it displays the

message G/O Active (**) (where ** is the number of devices). When your machine is a client, the

machine displays the message Client Active. If you see Off, your machine's Wi-Fi Direct interface is

disabled.

Signal

This field displays the current Wi-Fi Direct network signal strength.

Channel (For HL-3170CDW)

This field displays the current Wi-Fi Direct network channel.

Speed (For HL-3170CDW)

This field displays the current Wi-Fi Direct network speed.