Brother DCP-J132W Benutzerhandbuch - Seite 14
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Scanner Brother DCP-J132W herunter. Brother DCP-J132W 44 Seiten. Dcp-j132w
Auch für Brother DCP-J132W: Benutzerhandbuch (48 seiten), Schnellstart-Handbuch (31 seiten), Faqs (2 seiten)
Chapter 3
How to broadcast a fax
a
Load your document.
b
Press
(FAX).
c
Enter a number.
Press OK.
You can use either a Speed Dial, a
Group or a manually entered number
using the dial pad.
d
Repeat step c until you have entered
all the fax numbers to be included in the
broadcast.
e
Press Mono Start.
Faxing from the ADF
The machine starts scanning the
document.
Faxing from the scanner glass
When the LCD asks you Next Page?,
do one of the following:
To send a single page, press 2 (or
press Mono Start again).
The machine starts sending the
document.
To send more than one page, press
1 and place the next page on the
scanner glass.
Press OK.
The machine starts scanning the
page. (Repeat this step for each
page.)
After all the pages have been
scanned, press 2 or Mono Start to
begin faxing.
10
NOTE
3
• If you did not use up any of the numbers
for Groups, you can "broadcast" faxes to
as many as 90 different numbers.
• The machine's available memory will vary
depending on the types of jobs in the
memory and the numbers used for
broadcasting. If you broadcast to the
maximum amount of numbers available,
you will not be able to use Dual Access.
• If the Out of Memory message
appears, press Stop/Exit to cancel or
Mono Start to send the pages scanned so
far.
Cancelling a Broadcast in progress
a
Press Menu, 3, 5.
The LCD will show the fax number or
name being dialled and the
Broadcasting job number.
b
Press a or b to choose the Broadcasting
job number.
c
Press OK.
The LCD will ask you the following
question:
1.Clear
d
To cancel the broadcast, press 1.
e
Press Stop/Exit.
2.Exit
3