Fujitsu D3030 Technisches Handbuch - Seite 23
Blättern Sie online oder laden Sie pdf Technisches Handbuch für Hauptplatine Fujitsu D3030 herunter. Fujitsu D3030 38 Seiten. System board for bx920 s2
Independent
Channel Mode
DIMM 1F
DIMM 1E
DIMM 1D
DIMM 2A
DIMM 1A
CPU 2
DIMM 2B
DIMM 1B
DIMM 2C
DIMM 1C
required
required, if 2nd CPU is configured
optional, any type
Figure 3: Main memory operating modes
I
Spare channel mode is installed the same as performance channel
mode.
Independent Channel Mode
This mode allows the memory modules to be arranged in any order in each
channel. The channels do not have to be populated identically.
You can use memory modules with different speed ratings within a channel,
whereby the settings of the slowest memory module are used for each
channel.
All channels work with the fastest common frequency.
All timings except for the clock frequency can vary between the channels.
Always start by populating the main memory at CPU 1.
If CPU 2 is installed, the following applies:
– For CPU 2, there must be at least one DIMM module (DIMM 1D)
installed.
– The DIMM slots must be fitted in the following sequence:
D3030 (BX920 S2)
Channel Mode
DIMM 1F
CPU 1
DIMM 1E
DIMM 1D
CPU 2
not used
Technical Manual
Mirrored
CPU 1
DIMM 2A
DIMM 1A
DIMM 2B
DIMM 1B
DIMM 2C
DIMM 1C
optional, same type in bank per CPU
Main memory
Performance
Channel Mode
DIMM 1F
CPU 1
DIMM 1E
DIMM 1D
DIMM 2A
DIMM 1A
CPU 2
DIMM 2B
DIMM 1B
DIMM 2C
DIMM 1C
23