Fujitsu D3071 Kurzbeschreibung - Seite 23

Blättern Sie online oder laden Sie pdf Kurzbeschreibung für Hauptplatine Fujitsu D3071 herunter. Fujitsu D3071 24 Seiten.

Installing/removing main memory

Technical data

Technology

Total size

Module size

At least one memory module must be installed. Memory modules with different

memory capacities can be combined.

You may use only unbuffered DDR3 memory modules without ECC.

DDR3 memory modules must comply with the PC3-8500 or PC3-10600 speciﬁcation.

If you use more than one memory module, then make sure to distribute the

memory modules over both memory channels. By doing this you use the

performance advantages of the dual-channel mode.

Maximum system performance is achieved when identical memory modules

are used in Channel A and Channel B.

To simplify equipping, the slots are colour coded.

Depending on how the system is conﬁgured, the visible main memory can be reduced.

Module 2 Channel B

Module 4 Channel B

Module 1 Channel A

Module 3 Channel A

Slot to be used

Channel A, slot 1

Channel B, slot 2

Channel A, slot 3

Channel B, Slot 4

The installation/removal is described in the "Basic information on mainboard" manual.

Fujitsu Technology Solutions

DDR3 1066 / 1333 MHz unbuffered DIMM modules 240 pin; 1.5 V;

64 bit without ECC

1 to 32 GByte DDR3

1, 2, 4 or 8 GByte for one module

Number of memory modules inserted

English - 7