Fujitsu D3313-S Montageanleitung Handbuch - Seite 3
Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Hauptplatine Fujitsu D3313-S herunter. Fujitsu D3313-S 15 Seiten.
Seite drucken
- 1. Table of Contents
- 2. Step 1 Prepare the Chassis
- 3. Step 2 Mount the Cooler
- 4. Step 3 Insert RAM
- 5. Step 4 Put Board in Chassis
- 6. Step 5 Wire HDD
- 7. Step 6 Mount HDD
- 8. Step 7 Add Cross Bar
- 9. Step 8 Close Chassis
- 10. Optional: Application of a Passive Riser Card + Graphic Card AMD W2100
- 11. Step 9 Mount Msata
- 12. Step 10 Insert Passive Riser Card
- 13. Step 11 Add Graphic Card AMD W2100
Assembly Instructions
D3313-S
Then, remove the cross bar (middle section) of the chassis.
Remove the screw to take out the HDD tray. After removing the screw slide the tray off the chassis.
You should now have
a completely empty
chassis.
__________________________________________________________________________________________________________________________________________________________
Page 3 of 15
www.fujitsu.com