Fujitsu F2MC-8FX MB2146-441-E Setup-Handbuch - Seite 15
Blättern Sie online oder laden Sie pdf Setup-Handbuch für Hauptplatine Fujitsu F2MC-8FX MB2146-441-E herunter. Fujitsu F2MC-8FX MB2146-441-E 18 Seiten.
Seite drucken
EV Board MB2146-441-E Setup Guide
Chapter 2 EV Board Introduction
2.4 HW Module Description
2.4.1 Power Module
Input external power supply from outside. Please read the following instructions before using.
Output voltage: 5V
Output Current: 500mA
Connection: Power connector (DC IN)
2.4.2 BGMA Interface
To start debugging using a BGMA, users can connect IDC10 socket from the BGMA to
BGMA IF on an EV board before power on.
2.4.3 Test Pin
All MCU ports are easy accessible through test pins.
2.4.4 Connector
The EV board can be connected to MB95330 EV board through the four 8-pin connectors.
Then the EV board can support 120 degree inverter motor driving solution.
Page 13