Fujitsu F2MC-8FX Series Betriebshandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Hauptplatine Fujitsu F2MC-8FX Series herunter. Fujitsu F2MC-8FX Series 20 Seiten. 8-bit microcontroller
Auch für Fujitsu F2MC-8FX Series: Anwendungshinweis (12 seiten), Anwendungshinweis (23 seiten), Setup-Handbuch (18 seiten), Setup-Handbuch (19 seiten), Setup-Handbuch (30 seiten), Anwendungshinweis (20 seiten), Anwendungshinweis (21 seiten), Betriebshandbuch (21 seiten), Setup-Handbuch (23 seiten), Benutzerhandbuch (24 seiten), Setup-Handbuch (17 seiten)

■ How to oscillator mounting on a MCU board

Mount a crystal or ceramic oscillator in the crystal oscillator mounting sockets (for the main clock

and sub clock) on the MCU board.

The MCU board has one crystal oscillator mounting socket for the main clock and the other for the

sub clock. To distinguish them from each other, the board has the "MAIN CLOCK" and "SUB

CLOCK" labels are printed on the board near the main clock socket and sub clock socket. Mount the

crystal or ceramic oscillator along with the capacitors on the MCU board (see "Figure 7").

• For information on the crystal oscillator such as its frequency, refer to the datasheet for

• For the capacitance of the capacitor, refer to the datasheet for the crystal oscillator, etc.

• Neither the crystal oscillator nor the capacitor is bundled with this product.

■ Handling notes

• Data can not be written/erased to lower banks (1000

for the F

MC-8FX (MB95FV100D and MB2146-09).

• Do not perform a chip erase when using the software development support environment for the F

(MB95FV100D and MB2146-09).

GND

Capacitor mounting socket

Crystal oscillator

mounting socket

the evaluation MCU.

Figure 7 The example of mount of crystal or ceramic oscillator

Capacitor mounting socket

Ceramic oscillator

to 3FFF

) in the software development support environment

Crystal oscillator

MC-8FX