Fujitsu Mainboard D2974 Kurzbeschreibung - Seite 25
Blättern Sie online oder laden Sie pdf Kurzbeschreibung für Hauptplatine Fujitsu Mainboard D2974 herunter. Fujitsu Mainboard D2974 26 Seiten.
PCI bus interrupts - Selecting correct PCI slot
PCI bus interrupts - Selecting
correct PCI slot
Extensive information on this section is contained in the manual "Basic information on mainboard".
To achieve optimum stability, performance and compatibility, avoid the multiple use
of ISA IRQs or PCI IRQ Lines (IRQ sharing). Should IRQ sharing be unavoidable,
then all involved devices and their drivers must support IRQ sharing.
Which ISA IRQs are assigned to the PCI IRQ Lines is normally automatically
specified by the BIOS (see "BIOS Setup" description).
Monofunctional expansion cards
PCI/PCI Express expansion cards require a maximum of one interrupt, which is called the PCI
interrupt INT A. Expansion cards that do not require an interrupt can be installed in any desired slot.
Multifunctional expansion cards or expansion cards with integrated PCI-PCI bridge
These expansion cards require up to four PCI interrupts: INT A, INT B, INT C, INT D. How many
and which of these interrupts are used is specified in the documentation provided with the card.
The assignment of the PCI interrupts to the IRQ Lines is shown in the following table:
Onboard controller
PCI INT LINE
1 (A)
USB 1.0
USB 2.0
SATA / AHCI
SMBus
LAN
HD Audio
OnBoard
graphic
Mechanical slot
PCI INT LINE
1 (A)
PCIe x16 Slot
PCIe x4 Slot
PCI Slot 2
PCI Slot 3
All internal components of the SB 710 have their own Interrupt Routing Register.
They are not used jointly with PCI INT A, B, C and D.
Fujitsu Technology Solutions
2 (B)
3 (C)
A
B
C
D
-
X
-
X
-
-
-
X
-
-
2 (B)
3 (C)
C
D
A
B
-
-
-
-
4 (D)
5 (E)
-
-
-
-
-
-
-
-
-
X
-
-
-
X
4 (D)
5 (E)
A
B
C
D
-
-
-
.
6 (F)
7 (G)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
6 (F)
7 (G)
-
-
-
-
B
A
A
B
English - 7
8 (H)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
8 (H)
-
-
-
-
D
C
C
D
21