Fujitsu MB2146-401 Betriebshandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Hauptplatine Fujitsu MB2146-401 herunter. Fujitsu MB2146-401 34 Seiten. F2mc-8fx family evaluation board
Auch für Fujitsu MB2146-401: Anwendungshinweis (23 seiten), Setup-Handbuch (30 seiten)

Seite drucken

Caution of the products described in this document

CAUTION

Cuts, Damage

Cuts

Damage

Downloaded from

Elcodis.com

electronic components distributor

The following precautions apply to the product described in this manual.

Indicates a potentially hazardous situation which, if not avoided appropriately, may

result in minor or moderate injury and/or damage to the product or the equipment

to which the product is connected, to software resources such as data, or to other

properties.

Before moving the product, be sure to turn off all the power supplies and unplug the

cables. Watch your steps when carrying the product. Do not use the product at an

unstable location such as a place exposed to strong vibration or a sloping surface.

Doing so may let the product fall, resulting in an injury or fault.

The product has some sharp-pointed or edged parts inevitably exposed, such as

jumper plugs. Use meticulous care in handling the product not to get injured with

such pointed parts.

Neither put anything on or apply shock to the product. Once the product has been

powered, do not carry it. Doing either may cause a fault due to a load or shock.

Since the product contains many electronic components, keep it away from direct

sunlight, high temperature, and high humidity to prevent condensation. Do not use

or store the product where it is exposed to much dust or a strong magnetic or elec-

tric field for an extended period of time.

An adverse operating or storage environment can cause a fault.

Use the product within the ranges of its general specifications.

Operating it outside the range of any general specification may cause a fault.

To prevent electrostatic breakdown, do not let your finger or an object touch any

metal part of the connector. Before handling the product, touch a metal object (such

as a door knob) to discharge static electricity from your body.

When turning the power on or off, follow the relevant procedure described in this

document. Before turning the power on, in particular, be sure to finish making all the

required connections. To set up and use the product, follow the instructions given

in this document.

Using the product incorrectly or inappropriately may cause a fault.

Before plugging or unplugging any cable for this product, be sure to turn the power

supply off. When unplugging the cable, remove it while holding the connector with-

out pulling the cable itself. Pulling the cable itself or bending it may expose or dis-

connect the cable core, resulting in a fault.

Although the MCU socket is structured not to accept an evaluation MCU in a wrong

orientation or position, pay due attention to the mounting orientation when mounting

the evaluation MCU. Forcing the evaluation MCU to be inserted in a wrong orienta-

tion can damage the pins of the evaluation MCU and the accidental insertion pre-

vention mechanism of the socket, resulting in a fault.

When stored, the product should be kept in its packaging box as it has no housing.

Re-transporting the product may damage it to cause a fault. Keep the packaging

materials used for shipment of the product and use them when re-transporting it.