Fujitsu MB91460 SERIES Anwendungshinweis - Seite 19
Blättern Sie online oder laden Sie pdf Anwendungshinweis für Hauptplatine Fujitsu MB91460 SERIES herunter. Fujitsu MB91460 SERIES 26 Seiten. 32-bit microcontroller
Auch für Fujitsu MB91460 SERIES: Benutzerhandbuch (45 seiten), Erste Schritte (41 seiten), Anwendungshinweis (23 seiten), Anwendungshinweis (29 seiten), Anwendungshinweis (29 seiten)
Seite drucken
INTERRUPTS
Chapter 3 Interrupt Recommendations and Examples
3.9 Interrupt Vector Relocation
As discussed in the section 2.5.2, the interrupt vector table can be relocated to any word-
aligned (32-bit) memory location in steps of using the TBR.
This may be required when the original vector table is inaccessible at some point of time and
still the interrupts need to be serviced. Such need may arise in an application when some
sector of the Flash needs to be erased or programmed and while it is happening, some
interrupts such as CAN receive or UART receive interrupts need to be attended.
Here it is demonstrated to relocate the CAN0 and UART0 Receive vectors and not the
entire vector table but it is HIGHLY recommended that the entire vector table is
relocated to RAM. This is because if in case any unhandled interrupt occurs then the
software would crash.
© Fujitsu Microelectronics Europe GmbH
- 19 -
MCU-AN-300055-E-V10