Fujitsu Siemens D1156 Technisches Handbuch - Seite 21

Blättern Sie online oder laden Sie pdf Technisches Handbuch für Hauptplatine Fujitsu Siemens D1156 herunter. Fujitsu Siemens D1156 22 Seiten.

Installing network board with WOL

Install the network board as described in the operating manual for your unit.

Push the WOL cable onto the WOL plug connector of the system board.

To use the WOL functionality of a network board the power supply must provide a 5 V

auxiliary voltage of at least 1 A. If the system board was not already incorporated in a

device when you bought it you must check whether your power supply can provide the

auxiliary voltage.

You may find further information in the supplied description of the network board.

Incorrect replacement of the lithium battery may lead to a risk of explosion.

The lithium battery must be replaced with an identical battery or a battery type

recommended by the manufacturer (CR2032).

Do not throw lithium batteries into the trashcan. It must be disposed of in accordance with

local regulations concerning special waste.

Make sure that you insert the battery the right way round. The plus pole must be on the

top!

•

VAROITUS

Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan

laitevalmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden

mukaisesti.

•

VARNING

Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent

typ som rekommenderas av apparattillverkaren. Kassera använt batteri enligt

fabrikantens instruktion.

•

ADVARSEL

Lithiumbatteri - Explosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med

batteri af samme fabrikat og type. Lever det brugte batteri tilbage til leverandøren.

•

ADVARSEL

Explosionsfare ved feilaktig skifte av batteri. Benytt samme batteritype eller en

tilsvarende type anbefalt av apparatfabrikanten. Brukte batterier kasseres i henhold til

fabrikantens instruksjoner.

Lift the contact (1) a few millimeters and remove the battery from its socket (2).

Insert a new lithium battery of the same type in the socket (3).

A26361-D1156-Z120-6-7419

Add-on modules

English - 13