Fujitsu SK-96380-120PMT Benutzerhandbuch - Seite 27
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Hauptplatine Fujitsu SK-96380-120PMT herunter. Fujitsu SK-96380-120PMT 42 Seiten. Mb96300 series
Seite druckenSK-96380-120PMT User Guide
Chapter 4 Connectors
4.7 Alarm Comparator Connector (J2)
On the Connector J2 the adjusted analog voltage of potentiometer RP2 can be measured.
This voltage is used for the Alarm Comparator 0 on pin 26.
4.8 External Supply Voltage Vin Line (J3)
This connector is connected to the external supply voltage (Vin)
4.9 Vcc 5 Volts (J4)
On this connector the VCC5V supply can be measured.
4.10 Vcc 3.3 Volts (J5)
On this connector the VCC3V3 supply can be measured.
4.11 Vcc 2.5 Volts (J9)
On this connector the VCC2V5 supply can be measured.
4.12 Vcc 1.8 Volts (J10)
On this connector the VCC1V8 supply can be measured.
4.13 LIN Bus Inhibit (J6)
To this connector the INH pin of the LIN0 transceiver is connected.
4.14 LIN Bus Inhibit (J11)
To this connector the INH pin of the LIN1 transceiver is connected.
4.15 VCC Connector (J7)
This connector holds the VCC supply.
4.16 GND Connector (J8)
This connector holds the GND line.
© Fujitsu Microelectronics Europe GmbH
- 27 -
FMEMCU-UG-960001-15