A-Neu Video HD-88K Gebrauchsanweisung - Seite 6

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Matrix Switcher A-Neu Video HD-88K herunter. A-Neu Video HD-88K 20 Seiten.

NEUVIDEO

FRONT PANEL

POWER SWITCH:

The power switch turns the unit on and off. The LED will illuminate red to indicate that the switcher is ON and

is receiving power. The Switcher will remember that last state during a power cycle. When power is removed and resorted, the last

configuration will be evoked.

STATUS DISPLAY:

Front panel status display shows current matrix routing configuration. This same display also shows particular

configuration settings depending on your current function. In run mode (as shown above), the display shows each Output (destination)

channel and which input (source) is assigned.

IR SENSOR:

The IR sensor receives IR commands from the supplied remote controller or third party IR emitter.

INPUT STATUS DISPLAY:

SOURCE SELECT BUTTONS:

EDID MODE SELECT BUTTONS:

DESTINATION SELECT BUTTONS:

can be Source to Destination or one source to multiple destinations.

Example : Press Destination 1, 3, 5 then press Source 2 will route Input 2 to Output 1, 3, 5 respectfully.

19 INCH EAR MOUNT PAIR:

mount bracket attached.

Input sources 1 to 8 LED illuminates blue to indicate that a video source is present on that input.

Separate inputs 1 thru 8 select buttons are provided each source selection.

Used to select EDID mode using Input buttons #1 and #2.

Separate outputs 1 thru 8 select buttons are provided for each destination assignment. Routing

Converts desktop to 19 inch rack mount. Bracket (part # 1 U-440L) INCLUDED. Image shows rack

FRONT PANEL