Indesit IFW6841JPIX Kurzanleitung - Seite 4
Blättern Sie online oder laden Sie pdf Kurzanleitung für Backofen Indesit IFW6841JPIX herunter. Indesit IFW6841JPIX 41 Seiten.
Seite drucken
KEEP WARM
To start the "Keep Warm" function, turn the
thermostat knob to the relevant symbol; if the oven
is set to a different temperature (or if the cavity
temperature is above 65°C) the function will not start.
Please note: You can set the cooking time, cooking end time
(only if you set a cooking time) and a timer.
3. PREHEATING
Once the function starts, an audible signal and a
flashing icon
on the display indicate that the
preheating phase has been activated.
At the end of this phase, an audible signal and the
fixed icon
on the display will indicate that the oven
has reached the set temperature: at this point, place
the food inside and proceed with cooking.
Please note: Placing the food in the oven before preheating has
finished may have an adverse effect on the final cooking result.
. PROGRAMMING COOKING
You will need to select a function before you can start
programming cooking.
DURATION
Keep pressing
until the
flashing on the display.
Use
or
to set the cooking time you require, then
press
to confirm.
Activate the function by turning the thermostat knob
to the temperature you require: an audible signal will
sound and the display will indicate that cooking is
complete.
Notes: To cancel the cooking time you have set, keep
pressing
until the
icon starts flashing on the display,
then use
to reset the cooking time to "00:00". This cooking
time includes a preheating phase.
PROGRAMMING THE END COOKING TIME/
DELAYED START
After a cooking time has been set, starting the
function can be delayed by programming its end
time: press
until the
start flashing on the display.
Use
or
to set the time you want cooking to end
and press
to confirm.
Activate the function by turning the thermostat knob
to the temperature you require: the function will
remain paused until it starts automatically after the
period of time that has been calculated in order
forcooking to finish at the time you have set.
Notes: To cancel the setting, switch the oven off by turning
the selection knob to the
Notes: Delay to start functionality is not available for Grill
and Turbo Grill functions.
icon and "00:00" start
icon and the current time
position.
END OF COOKING
An audible signal will sound and the display will
indicate that the function has finished.
Turn the selection knob to select a different function
or to position " " to switch the oven off.
Please note: If the timer is active, the display will show "END"
alternately with the remaining time.
. SETTING THE TIMER
This option does not interrupt or program cooking
but allows you to use the display as a timer, either
during while a function is active or when the oven is
off.
Keep pressing
until the
"00:00" start flashing on the display.
Use
or
to set the time you require and press
to confirm.
An audible signal will sound once the timer has
finished counting down the selected time.
Notes: To cancel the timer, keep pressing
starts flashing, then use
. AUTOMATIC CLEANING FUNCTION – PYRO
Do not touch the oven during the Pyro cycle.
Keep children and animals away from the oven
during and after (until the room has finished
airing) running the Pyro cycle.
Remove all accessories - including shelf guides - from
the oven before activating the function. If the oven is
installed below a hob, make sure that all the burners
or electric hotplates are switched off while running
the selfcleaning cycle.
For optimum cleaning results, remove excessive
residuals inside the cavity and clean the inner door
glass before using the Pyro function. We recommend
only running the Pyro function if the appliance
contains heavy soiling or gives off bad odours during
cooking.
To activate the automatic cleaning function, turn the
selection knob and the thermostat knob to the
icon. The function will be activated automatically, the
door locked and the light inside the oven switched
off: The display will show the time remaining to the
end, alternating with "Pyro".
Once the cycle has been completed, the door remains
locked until the temperature inside the oven has
returned to a safe level. Air the room during and after
running the Pyro cycle.
e "00:00" icon and
until the
to reset the time to "00:00".
icon