Indesit KN3C11/FR S Betriebsanleitung - Seite 22

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Herde Indesit KN3C11/FR S herunter. Indesit KN3C11/FR S 24 Seiten. Cooker and oven

Seite drucken

Care and maintenance

Switching the appliance off

Disconnect your appliance from the electricity supply before

carrying out any work on it.

! Never use steam cleaners or pressure cleaners on the

appliance.

Cleaning the oven

• The stainless steel or enamel-coated external parts and the

rubber seals may be cleaned using a sponge that has been

soaked in lukewarm water and neutral soap. Use specialised

products for the removal of stubborn stains. After cleaning,

rinse and dry thoroughly. Do not use abrasive powders or

corrosive substances.

• The inside of the oven should ideally be cleaned after each

use, while it is still lukewarm. Use hot water and detergent,

then rinse well and dry with a soft cloth. Do not use abrasive

products.

•

Clean the glass part of the oven door using a sponge and a

non-abrasive cleaning product, then dry thoroughly with a

soft cloth. Do not use rough abrasive material or sharp metal

scrapers as these could scratch the surface and cause the

glass to crack.

• The accessories can be washed like everyday crockery, and

are even dishwasher safe.

• Dirt and grease should be removed from the control panel

using a non-abrasive sponge or a soft cloth.

Inspecting the oven seals

Check the door seals around the oven regularly. If the seals

covering the lamp socket (see fi gure).

2. Remove the light bulb and replace it with a similar one:

voltage 230 V, wattage 25 W, cap E 14.

3. Replace the lid and reconnect the oven to the electricity

supply.

! Do not use the oven lamp as/for ambient lighting.

Cleaning the glass ceramic hob

! Do not use abrasive or corrosive detergents (for example,

products in spray cans for cleaning barbecues and ovens), stain

removers, anti-rust products, powder detergents or sponges with

abrasive surfaces: these may scratch the surface beyond repair.

• It is usually sufficient simply to wash the hob using a damp

sponge and dry it with absorbent kitchen roll.

• If the hob is particularly dirty, rub it with a special glass

ceramic cleaning product, then rinse well and dry thoroughly.

• To remove more stubborn dirt, use a suitable scraper (this is

not supplied with the appliance). Remove spills as soon as

are damaged, please contact your

nearest After-sales Service Centre. We

recommend that the oven is not used until

the seals have been replaced.

Replacing the oven light bulb

1. After disconnecting the oven from the

electricity mains, remove the glass lid

possible, without waiting for the appliance to cool, to avoid residues

forming crusty deposits. You can obtain excellent results by using a

rustproof steel wire sponge - specifically designed for glass ceramic

surfaces - soaked in soapy water.

• If plastic or sugary substances have accidentally been melted

on the hob, remove them immediately with the scraper, while the

surface is still hot.

• Once it is clean, the hob may be treated with a special protective

maintenance product: the invisible film left by this product protects

the surface from drips during cooking. This maintenance should be

carried out while the appliance is warm (not hot) or cold.

• Always remember to rinse the appliance well with clean water

and dry it thoroughly: residues can become encrusted during

subsequent cooking processes.

Cleaning stainless steel

Stainless steel can be marked by hard water that has been left on

the surface for a long time, or by aggressive detergents that contain

phosphorus. We recommend that the steel surfaces are rinsed well

then dried thoroughly.

Assistance

Please have the following information handy:

• The appliance model (Mod.).

• The serial number (S/N).

This information can be found on the data plate located on the

appliance and/or on the packaging.

Glass ceramic hob cleaners Available from

Window scraper Razor blade

DIY Stores

scrapers

Replacement blades

DIY Stores,

supermarkets,

chemists

COLLO luneta

Boots, Co-op stores,

HOB BRITE

department stores, Regional

Hob Clean

Electricity Company shops,

SWISSCLEANER

supermarkets

Catalitic Cleaning*

In some models, the most exposed internal vertical sides of the

oven are coated with porous enamel, which is called catalytic

enamel. When heated, this enamel destroys fat particles given off

by the food. This „oxidation" of the fat particles occurs when the

temperature of the sides exceeds 170°C. The porous quality of the

catalytic enamel increases the surface area where the exchange

vital to the oxidation of the fats takes place.

If there is still grime on the catalytic surfaces after the cooking

programme has ended, leave the empty oven on with the door

shut, turning the temperature adjustment knob to its maximum

setting. Leave the oven like this for a period of time between

60 and 90 minutes, according to how much dirt was left inside.

The cleaning process for more stubborn food residues may be

quickened by using hot water and a soft brush.

Only available in certain models.