AEG ABB8121VNF Benutzerhandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Gefrierschrank AEG ABB8121VNF herunter. AEG ABB8121VNF 16 Seiten.

Seite drucken

www.aeg.com

Problem

There is too much frost and

ice.

The compressor does not

start immediately after

pressing the FROSTMATIC,

or after changing the tem-

perature.

Water flows on the floor.

Temperature cannot be set.

DEMO appears on the dis-

play.

The temperature in the ap-

pliance is too low/too high.

Possible cause

The door is not closed cor-

rectly or the gasket is de-

formed/dirty.

Food products are not wrap-

ped properly.

This is normal, no error has

occurred.

The melting water outlet is

not connected to the evapo-

rative tray above the com-

pressor.

The FROSTMATIC function

is switched on.

The appliance is in demon-

stration mode.

The temperature regulator is

not set correctly.

The door is not closed cor-

rectly.

The food products' tempera-

ture is too high.

Many food products are

stored at the same time.

The door has been opened

often.

The FROSTMATIC function

is switched on.

There is no cold air circula-

tion in the appliance.

Solution

Refer to "Closing the door".

Wrap the food products bet-

ter.

The compressor starts after a

period of time.

Attach the melting water

outlet to the evaporative

tray.

Switch off FROSTMATIC

manually, or wait until the

function resets automatically

to set the temperature. Refer

to "FROSTMATIC function"

Keep the OK button pressed

for approximately 10 sec-

onds until a long sound is

heard and display shuts off

for a short time.

Set a higher/lower tempera-

ture.

Refer to "Closing the door".

Let the food products tem-

perature decrease to room

temperature before storage.

Store less food products at

the same time.

Open the door only if neces-

sary.

Refer to "FROSTMATIC

function".

Make sure that there is cold

air circulation in the appli-

ance.