A-Neuvideo ANI-3AUTOHDMI Gebrauchsanweisung - Seite 10
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Schalter A-Neuvideo ANI-3AUTOHDMI herunter. A-Neuvideo ANI-3AUTOHDMI 16 Seiten.
Seite drucken
Serial Commands
COMMAND
?8
HELP8
SET FACTORY DEFAULT8
GET COMMAND VER8
GET FW VER8
GET MODEL NAME8
GET MODEL TYPE8
SET OUT A ROUTE N18
GET OUT A ROUTE8
SET OUT AUTO MODE N18
GET OUT AUTO MODE8
GET IN TYPE LIST8
GET OUT TYPE LIST8
GET IN PORT NUMBER8
GET OUT PORT NUMBER8
SET IN N1 EDID N28
DESCRIPTION AND PARAMETERS
Show the full command list.
Show the full command list.
Reset the unit to the factory defaults.
Show the unit's current command version.
Show the unit's current firmware version.
Show the unit's model name.
Show the unit's product type.
Route the specified input to the HDMI output.
N1 = 1~3
[HDMI input number]
Show which input is currently routed to the HDMI output.
Set the auto switching/scanning behavior of the unit.
Available values for N1:
0
[Off]
1
[Auto switch]
Show the current auto switching/scanning mode of the unit.
List the port type of all inputs on the unit.
List the port type of all outputs on the unit.
Show the total number of inputs on the unit.
Show the total number of outputs on the unit.
Set the EDID to use on the specified input.
N1 = 1~3
[HDMI input number]
Available values for N2:
1
[Internal FHD, 2 channel audio]
2
[Internal FHD, multi-channel audio]
3
[Internal UHD, 2 channel audio]
4
[Internal UHD, multi-channel audio]
5
[Internal UHD+, 2 channel audio]
6
[Internal UHD+, multi-channel audio]
7
[User EDID 1]
8
[User EDID 2]
9
[User EDID 3]
10 [Copy output's EDID]
8