A-Neuvideo ANI-88UHD Gebrauchsanweisung - Seite 6
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Schalter A-Neuvideo ANI-88UHD herunter. A-Neuvideo ANI-88UHD 16 Seiten. 8x8 hdmi 4k uhd matrix w/ hdcp 2.2
Seite drucken
A
NEUVIDEO
Rear Panel
q
e
w
r
CONTROL:
This port is the link for Telnet and WebGUI controls. Connect to an active Ethernet link with an RJ-45 terminated cable (for
q
further details, please refer to the Telnet Control section).
WARNING: Please do not connect this port directly to the PC/Laptop as the Telnet function will not work.
RS-232:
Connects to a PC or control system with a D-Sub 9-pin cable for the transmission of RS-232 commands.
w
IR IN:
Connects to the supplied IR extenders for IR signal reception from the remote control of the Matrix. Ensure that the remote is
e
within the direct line-of-sight of the IR extender when used.
SERVICE:
Manufacturer use only.
r
HDMI OUT A~H:
Connects to HDMI equipped TVs or monitors for display of the HDMI Input source signal.
t
HDMI IN 1~8:
Connects to the HDMI Input source devices such as a DVD player or a Set-Top Box with a HDMI cable or DVI to HDMI
y
cable.
DC 24V:
Plug the 24V/DC power supply into the unit and connect the adaptor to an AC outlet.
u
Side Panel
FAN VENTILATOR:
These are air ventilation areas, DO NOT block these areas or cover it with any object. Please allow adequate
q
space around the unit for air circulation.
OPERATION CONTROLS & FUNCTIONS
t
y
q
4
u