A-Neuvideo HD-44G Gebrauchsanweisung - Seite 8

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Schalter A-Neuvideo HD-44G herunter. A-Neuvideo HD-44G 20 Seiten. Ethernet (tcp) set up
Auch für A-Neuvideo HD-44G: Gebrauchsanweisung (20 seiten), Gebrauchsanweisung (6 seiten)

Seite drucken

NEUVIDEO

REAR PANEL

DC POWER INLET:

The Switcher is fitted with a DC power

plug input connector. Ensure that the used is of an approved type

and is of sufficient current carrying connector capacity with the

correct voltage and connector polarity. 12Volt DC power supply 3A

Max (Center pin positive).

IR EXTENDER CONTROL:

Extend distance maximum 300 Meters / ~984 feet. When you

plug the External IR extender into the switcher, the front panel

IR receiver remain active.

RS-232 CONNECTION:

interfacing to a PC a computer or touch panel control, to the

switcher via this DB-9pin Female connector for serial RS-232

control.

INPUTS- 1,2,3, & 4 HDMI:

direct digital video/audio to this Female HDMI connector. This

connector supports HDMI digital video/audio and DVI digital

video sources.

HDMI Digital Video/Audio, Connector with fix screw

Input 1 ~ Input 4

OUTPUTS- 1,2,3,& 4 HDMI:

direct digital video/audio to this Female HDMI connector. This

connector supports HDMI digital video/audio and DVI digital

video sources.

HDMI Digital Video/Audio, Connector with fix screw

Output 1 ~ Output 4

Support one of IR Extender.

RS-232 control port to allow for

Connect a signal link of HDMI

Power Jack:

DC Jack - Inner OD ᴓ 2.1mm (+ )

Power input - 12VDC, 3A

IR Extender Jack:

Female Jack - inner OD ᴓ 3.5 mm

Remote port :

D-SUB-9pin Female connector

HDMI Digital Video/Audio Connector:

HDMI Female connector.

Note: With the proper adapters, the

switcher can be used with DVI digital video

signals HDCP compliant. DVI does not

support audio.