A-Neuvideo HD-44G Gebrauchsanweisung - Seite 6

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Schalter A-Neuvideo HD-44G herunter. A-Neuvideo HD-44G 6 Seiten. Ethernet (tcp) set up
Auch für A-Neuvideo HD-44G: Gebrauchsanweisung (20 seiten), Gebrauchsanweisung (20 seiten)

Seite drucken

AP OPERATION

STEP 5. START USING THE AP

Interface Introduction:

The left side shows the 7 input signals and the right shows the 5 resolution options.

Use POWER to turn on and off the unit.

Use STATUS to see the current input and output status.

Use ENTER to conﬁ rm your connection from input to output.

(5-1) Click your source input signal on the left.

(5-2) Click your target resolution on the right. A line will be

formed to show connection.

(5-3) Click ENTER.

(5-4) When the red line turns blue, the operation is done

Note: If the unit is not receiving the signal you select,

the operation will fail.

AP OPERATION (5)

Picture 5-4: The input VGA signal has been

successfully set to display in WXGA

resolution.