AEG 240 D Betriebs- und Installationsanleitung - Seite 10

Blättern Sie online oder laden Sie pdf Betriebs- und Installationsanleitung für Lüftungshaube AEG 240 D herunter. AEG 240 D 22 Seiten.

Wall unit mounting

• Make the holes on the bottom of the cupboard, using the drilling

template.

• From inside the cupboard, insert the 4 supplied screws and tighten

them in the appropriate holes on the appliance. - Fig. 4.

• Fix the drilling template to the wall.

• Make 3 Ø 8mm holes in the wall 2 at points I, 1 as desired at points

• Insert the three Ø 8mm expansion plugs into the wall.

• Insert two 5x45 screws at points I but do not tighten them

completely.

• Adjust the unit so that it is positioned at a right angle to the wall by

turning the two support screws G.

• Fit the hood into holes I, tighten the 2 screws.

• From inside the hood, insert the third 5x45 screw into hole L. Šee

Fig. 5

Fig. 6