Kohler 10EKD Installationsanleitung Handbuch - Seite 9
Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Sanitärprodukt Kohler 10EKD herunter. Kohler 10EKD 17 Seiten.
Auch für Kohler 10EKD: Einbauanleitung (4 seiten)
Seite drucken
10. Service Schedule
Perform Service at Intervals Indicated (X)
Fuel System
Check the fuel level and fill as necessary
Check fuel lines and replace as necessary *[
Replace the fuel filter *[
Lubrication System
Check crankcase oil level and add as necessary
Replace the oil in crankcase *
Replace the lube oil filter element *
Cooling System
Check coolant level and fill as necessary *
Check seawater outlet and clean as necessary [
Check function of siphon break, if equipped
Check and clean seawater flow switch *
Replace seawater pump impeller *[
Adjust seawater pump tension *[
Check heat exchanger anticorrosion zinc
condition *
Replace heat exchanger anticorrosion zinc *
Flush cooling system *[
Ignition System
Check spark plugs condition and gap *
Replace spark plugs *
Intake/Exhaust System
Inspect exhaust system components *[
Check the exhaust gas condition
Service backfire flame arrestor *
Check and/or replace the catalyst assembly *[
Replace the CO sensor module *[
Check the crankcase breather pipe for obstructions *[
Inspect the complete exhaust system ***
Electrical System
Keep battery charged and in good condition
Check and tighten electrical connections *
Clean battery cables [
Engine And Mounting
Check for water, fuel, coolant, and oil leakage *[]
Retighten all nuts and bolts *
Check tightness of mounting bolts/vibromounts *
Remote Control System
Check remote control operation
Generator
Test run generator set
Blow dust out of generator *[
Clean slip rings and inspect brushes *[
*
Requires removal of sound shield, if installed.
Consult your local distributor/dealer for service.
[
Read WARNING found at the beginning of manual regarding moving parts.
]
TT-1617
12/13
After
Before
50 Hr or
100 Hr or
Starting
1 Month
3 Months
X
X
X (200 hr)
X (200 hr)
X
X (during
operation)
X
X (during
operation)
X
X
X (200 hr)
X
X
X (200 hr)
X (break-in
period)
X (weekly)
*** Should be performed by your local distributor/dealer.
Consult battery manufacturer's instructions.
Every
Every
Every
300 Hr or
500 Hr or
6 Months
Yearly
X
X
X
X
(check)
X (200 hr)
X
X (1000 hr/
2 years)
X
X (250 hr)
X
X (every
2 years)
X
X (1000 hr.)
X
X
X
X
X
X
X
X
9