A-Neuvideo ANI-FIBER-F02P Gebrauchsanweisung - Seite 9
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Extender A-Neuvideo ANI-FIBER-F02P herunter. A-Neuvideo ANI-FIBER-F02P 12 Seiten. 4k fiber optic hdmi extender - 3300 ft/1000m - 4k@60hz w/ir, rs-232, hdmi 2.0 support
Seite druckenOPERATION CONTROLS AND FUNCTIONS
Receiver Panel
q POWER LED:
The power indicator is always on when the Receiver is powered on.
w FIBER LED:
The optical fiber connection indicator is always on when the Transmitter and Receiver
establish a normal optical fiber signal connection.
e HDMI LED:
The HDMI signal output indicator is always on when the HDMI OUT port of the
Receiver outputs signals to the HDMI display device.
r IR IN:
Connect to IR Receiver cable. The IR signal will send to the IR OUT port of the Transmitter.
t IR OUT:
Connect to IR Blaster cable. The IR signal is from the IR IN port of the Transmitter.
y SERVICE PORT:
Firmware update port.
u DC 5V:
DC 5V/1A power supply port
i FIBER:
Connect the Receiver optical fiber module, and receive signals from the Transmitter via
an optical fiber cable.
o HDMI OUT:
HDMI signal output port, connect to HDMI display device such as HDTV or Projector
with an HDMI cable.
a AUDIO OUT:
Audio signal extracting output port (extract the HDMI OUT audio signal), connect to
audio output device such as amplifier or speaker.
s RS-232:
RS-232 signal pass-through port for transmitting RS-232 command signals between the
Transmitter and Receiver.
7