A-Neuvideo ANI-4K-VW Gebrauchsanweisung - Seite 10

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Medienkonverter A-Neuvideo ANI-4K-VW herunter. A-Neuvideo ANI-4K-VW 20 Seiten. 1x4 hdmi 4k video wall splitter (cascadable)

Seite drucken
A
NEUVIDEO

PC Application Control

Visit A-NeuVideo.com to download the software application for the ANI-4K-VW and execute it to control the Video Wall system.
Note: Before installing, remove any former versions that are existing. Once the application is installed successfully, click and open the
"Video Wall Set".
PC Application Control
SEARCH MAC:
q
how many TV Wall unit(s) are within the network
system, then select the unit you wish to control.
Note: This action should be executed every time when
the unit is Powered On or reset or re-run the "ANI-4K-
VW" application.
Select the unit that is to be adjusted then press
"Connect" to connect the unit.
Every time the unit is connected successfully, a dialog
will appear showing "refresh completed" based
on the selected MAC, the application will display the
current unit's status. However, image display will not
be refreshed automatically and can only be refreshed
manually.
When using more than (1) unit for a TV Wall setting,
setting up the unit's ID number is required to ensure
the correct display of each single TV wall image.
System Settings
POWER:
q
controlled unit. To control all connected units, click
on "ALL IP" then click "Power". From Power ON to
Power OFF, the application will disconnect the link, to
Power ON again, please re-connect.
FACTORY RESET:
w
device settings to default, to switch all devices back to
the default setting, click "ALL IP" and then "Factory
Reset".
REFRESH:
e
current settings, the status of all the TV Wall Sets will
follow the current chosen device.
Note: Image Adjust will not refresh, users have to click
on "Image Adjust" to manually refresh to read the
Image Adjust current status.
SEARCH MAC:
r
the on-line TV Wall units.
8
Click on "Search MAC" to confirm
Click on "Power" to power on/off the
Click on "Factory Reset" to set
Click on "Refresh" to read the devices
Click on "Search MAC" to define