A-Neuvideo ANI-16-MV-HDMI Gebrauchsanweisung - Seite 7
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Monitor A-Neuvideo ANI-16-MV-HDMI herunter. A-Neuvideo ANI-16-MV-HDMI 12 Seiten. Hdmi multi-viewer w/ seamless switcher
Seite drucken
A
NEUVIDEO
PC Softw are Control
Installation
The software can be downloaded from the product page off our website "ANI-16-MV PC Software.exe" The software is a standalone
.EXE file requiring no installation. Download the file to your hard drive and double click the file name to start the program.
PREPARATION:
Connect PC and multi-viewer by RS-232 cable.
q
Power-up multi-viewer.
w
Double click "ANI-16-MV.exe" icon to run it.
e
Select PC connect COM port, Click to connect or disconnect PC and multi-viewer and the corresponding light will display.
q
Select the HDMI output resolution.
w
Select the input source.
e
Select the output mode.
r
Adjust the HDMI output picture quality.
t
Display or hidden the border.
y
Display or hidden the OSD menu.
u
Input characters in the Set box (The maximum is 16 characters). The user can select the input port that needs to be set, then click
i
the Set key on the right. The input port selection is completed and will have saved to the following list box. Click the Query key and the
corresponding list will display.
FW upgrade part: Click to open Firmware. The click the upgrade button, the new firmware will auto download to the multi-viewer and
o
restart it.
Press the Reset button, the quad multi-viewer will reset to factory state.
a
** If using a USB to RS-232 cable, you must use one that contains FTDI chipset. A cable that utilizes CH340 will not function correctly.
q
w
e
r
t
y
PC Softw are Control
5
u
i
o
a