Kohler FAMILY CARE K-22781T-1 Einbauanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Einbauanleitung für Armaturen für das Badezimmer Kohler FAMILY CARE K-22781T-1 herunter. Kohler FAMILY CARE K-22781T-1 4 Seiten. Vanity (rocker)

Seite drucken

Wall Plug

Attachment

Bolt (x2)

Install the faucet, handle and drain to the lavatory

according to the manufacturer s instructions.

Note!

The 3 pipes on the handle shall be pulled through the

hole on the lavatory bottom and tightened with the cable tie,

as shown in Fig.3.

Put the sealant around the back wall attached surface of

the lav evenly.

Carefully place the lavatory against the wall, so the

hanger bolts extend through the lavatory holes.

Level the lavatory.

Install the cap nuts and washers, and tighten until snug.

CAUTION: Risk of product damage.

overtighten the cap nuts.Overtightening may cause

damage to the product.

Clean the lavatory top.

1395235-T01-A

Wall Outlet Trap

Wall Outlet

Fig.#2

Do not

Cable Tie

Pipe Hole

Fig.#4

Wall Plug

Attachment

Bolt (x2)

Apply Silicone sealant

along this face

Handle

Washer

Pipe

Offset Nut

-3-

Floor

Floor Outlet

Fig.#3

Nut

Fig.#5

Outlet Trap