AEG LAVATHERM 56800 User Information - Seite 22

Blättern Sie online oder laden Sie pdf User Information für Trockner AEG LAVATHERM 56800 herunter. AEG LAVATHERM 56800 36 Seiten. Electrolux user information condenser dryer 56800

Seite drucken

Programming options

Objective

Permanently pro-

gramme in the audible

signal which reminds

you that the pro-

gramme is complete.

Adjust 'level of dryness'

detection:

If the laundry is slightly

drier or slightly damp-

er at the end of the

programme than with

the standard setting.

To deactivate the EMP-

TY WATER display when

using an external drain

for the condensed wa-

ter.

1. Turn the programme selector to any programme.

2. Press the AUDIBLE SIGNAL button and hold down for ap-

prox. 5 seconds.

A brief signal sounds several times. The AUDIBLE SIGNAL

display flashes several times.

The setting is permanently programmed.

The setting is cancelled as described under 1 and 2.

1. Turn the programme selector to any programme.

2. Press the AUDIBLE SIGNAL and SENSITIVE buttons at the

same time and hold down for approx. 5 seconds.

The current setting is displayed on the programme

progress display:

– END display: Setting for drier laundry

– COOLING display: Standard setting

– DRYING display: Setting for damper laundry

3. Press the START/PAUSE button until the setting required

appears on the programme progress display.

4. Turn the programme selector to OFF.

The setting is permanently programmed.

1. Turn the programme selector to any programme.

2. Press the DELAY TIMER and SPECIAL CARE buttons at the

same time and hold down for approx. 5 seconds. The

EMPTY WATER display flashes briefly.

The EMPTY WATER display is permanently deactivated.

Settings may be cancelled as under 1 and 2, but the EMPTY

WATER display is briefly illuminated (instead of flashing).

Implementation