Kohler Archer K-2595-G Schnellstart-Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Badewannen Kohler Archer K-2595-G herunter. Kohler Archer K-2595-G 2 Seiten.
Seite druckenRequired Electrical Service
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Blower:
120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
Installation:
Freestanding
Drain location:
End
Basin area, bottom:
51-1/16" x 19-11/16" (1297 mm x 500 mm)
Basin area, top:
58-9/16" x 25-5/16" (1487 mm x 643 mm)
Weight:
100 lbs (45.4 kg)
Minimum floor load:
44.2 lbs/ft² (215.8 kg/m²)
Water depth:
15-1/16" (383 mm)
Water capacity:
65 gal (246.1 L)
Template:
Footprint, 1265461, not required, not
included
Electrical component
Blower: 120 V, 10 A, 60 Hz, 300 W
rating:
Blower speed:
Variable
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
3-18-2017 06:41
68" BubbleMassage Bath
Faucet Hole Locations
Notes
Measure your actual product for rough-in details.
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Measure your actual product for roughing-in
details.
Install this product in accordance with the
installation instructions.
Locate a GFCI-protected 120 V, 15 A, grounded
electrical outlet behind the bath and within 24"
(610 mm) of the blower motor.
Remote blower installation kit K-1446 is available
for relocating the blower.
This bath is designed for freestanding installation
only.
NOTICE: Do not support the load weight of the
bath by the rim.
Archer
K-2595-G