Kohler Escale K-25091T-S Installationsanleitung Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Toiletten Kohler Escale K-25091T-S herunter. Kohler Escale K-25091T-S 23 Seiten. Floor standing toilet
Auch für Kohler Escale K-25091T-S: Installationsanleitung Handbuch (11 seiten), Installationsanleitung Handbuch (28 seiten), Installationsanleitung Handbuch (30 seiten)

Note: 1. The sensing distance in the table is measured with a

30 30 cm white or black board as the reflecting

surface.

2. The user may set the amount of water per flush

according to the specifications of the specific toilet

and water pressure.

3. The infrared transmiting angle is 20° downward.

4. To ensure an effective flushing preformame, please

turn the adjusting bolt properly according to actual

using conditions when the product is used with toilet

(such as K-8750,etc.)

5. Do not discard the special wrench when the installation

is complete.It will be helpful for qualified maintenance

personnel to repair the outlet connection assembly

and the vacuum breaker.

6. The slurry mold is used only when install the valve

box.

When the water pressure is 0.10 ~ 0.55 MPa, If sometimes

splashs, you can reduce the water flow. When adjusting,

remove the sensor cover and turn the adjusting bolt for

water flow till good flushing and no splash.

注意： 1.

水流调节

流动水压在0.10~0.55MPa时，如有溅出现象可适当调小

水流速度。调节时取下面板，顺时针方向旋动水流调节栓

至能冲洗干净而又不溅出即可。

右旋

30cm X 30cm

20° 。

K-8750

1350669-T01-A