Kohler VEIL K-29918T-S Installationsanleitung Handbuch - Seite 5
Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Toiletten Kohler VEIL K-29918T-S herunter. Kohler VEIL K-29918T-S 26 Seiten. Wall-hung toilet
Auch für Kohler VEIL K-29918T-S: Installationsanleitung Handbuch (29 seiten)
Seite drucken
Place the new bowl on the wall through the carrier. Wrench
the nut to tighten and make them attached securely.
See Fig. 5b.
·
Torque for tightening nuts is recommended to be within
the range from 8 Nm to 12 Nm.
Finished Wall
Adjust to horizontal and finish tightening. See Fig. 5c.
Apply sealant to make sure the bowl's edge seals to the wall.
See Fig. 5d.
Install the toilet seat according to the toilet seat installation
instructions.
5. Install The Side Panels
NOTE:
There is a left and right side panel. They are not
interchangeable.
·
Clean the vitreous surface where the side panel adhesive
locking tape will contact the bowl. Make sure the vitreous
surface is dry.
·
Determine the correct panel for each side of the bowl.
·
Peel the backing off each of the three strips of adhesive
locking tape on one of the side panels.
·
Carefully align the side panel and press into place.
1247360-T01-D
Fig. #5c
5c
5b
·
Fig. #5b
5b
5.
·
·
·
·
-5-
8Nm 12Nm
5c
5d
Fig. #5d
5d