Kohler Command PRO ECV749 Benutzerhandbuch - Seite 14
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Motor Kohler Command PRO ECV749 herunter. Kohler Command PRO ECV749 21 Seiten. Vertical crankshaft
Auch für Kohler Command PRO ECV749: Benutzerhandbuch (8 seiten)
Seite drucken
Storage
If the engine will be out of service for two months or
more, use the following storage procedure:
1. Clean the exterior surfaces of the engine. On
EFI engines, avoid spraying water at the wiring
harness or any of the electrical components.
2. Change the oil and filter while the engine is still
warm from operation. Refer to Change Oil and
Filter.
3. The fuel system must be completely emptied,
or the gasoline must be treated with a stabilizer
to prevent deterioration. If you choose to
use a stabilizer, follow the manufacturers
recommendations, and add the correct amount
for the capacity of the fuel system. Fill the fuel
tank with clean, fresh gasoline. Run the engine
for 2-3 minutes to get stabilized fuel into the fuel
system. Close fuel shut off valve when unit is
being stored or transported.
To empty the system, run the engine until the
tank and fuel system are empty.
4. Remove the spark plugs. Add one tablespoon of
engine oil into each spark plug hole. Install plugs,
but do not connect the plug leads. Crank the
engine two or three revolutions.
5. Disconnect the negative (-) battery cable or use a
Battery Minder trickle charger while the unit is in
storage.
6. Store the engine in a clean, dry place.
14
Parts Ordering
The engine Specification, Model, and Serial Numbers
are required when ordering replacement parts from
your Kohler Engine Service Center. These numbers are
found on the identification plate which is affixed to the
engine shrouding. Include letter suffixes if there are
any. Refer to Serial and Data Label.
Always insist on genuine Kohler parts. All genuine
Kohler parts meet strict standards for fit, reliability,
and performance.
Major Repair
Major repair information is available in Kohler Engine
Service Manuals. This type of repair generally requires
the services of a trained mechanic and the use of
special tools and equipment. Kohler Engine Service
Centers have the facilities, training, and genuine
Kohler replacement parts necessary to perform this
service.
For the nearest sales and service location:
• Visit our Web site: www.KohlerEngines.com
• Call 1-800-544-2444 (U.S. and Canada)
• Look in your local telephone directory under
Engines-Gasoline