ACADIA LIVING Vintage L Einbauanleitung

Blättern Sie online oder laden Sie pdf Einbauanleitung für Inneneinrichtung ACADIA LIVING Vintage L herunter. ACADIA LIVING Vintage L 2 Seiten. Outside mount 4 sides

Seite drucken
Step 5 : Add the Finishing Touch
IMPORTANT : Check shutter operation and alignment before installing frame inserts, as frame inserts
can NOT be removed once they are snapped into place.
Match each frame insert with the corresponding side of the frame: Left to Left, Top to Top, Right to
Right, Bottom to Bottom.
Snap the frame inserts into place (OR remove double-sided foam tape and put the frame insert into
place). This will cover screws and provide a finished look.
!
A rubber mallet can be used to help install frame inserts.
Snap!
Maintain Your Shutter
Use a clean dry cloth, feather duster or vacuum with brush attachment to gently remove dust and
debris. To ensure thorough cleaning, wipe the louvers in the open and closed positions.
Do not immerse the product in water and do not use harsh chemicals to clean. This may cause
discoloration and the wood to warp. Ultrasonic cleaning is not recommended. For best results on
Composite Shutters, use a cotton cloth dampened with water. Polyester cloths tend to create static,
which can attract dust.
Adjust the Tension System
If over a period of time the louvers on your shutters should
loosen or not function properly, a built-in tension system can be
adjusted. Simply open the panels fully and find the tension
adjuster screw hole on the side of each panel. Use a screwdriver
to gently turn the screw on each side of the panel to your desired
resistance level. Repeat process for other panel(s) if necessary.
Lifetime Limited Warranty
All Acadia Living shutters have a lifetime limited warranty and will be free from defects in materials or
workmanship for as long as the original retail purchaser owns the shutters, provided that such products
were properly installed in residential dwelling; and such products were made or assembled exclusively
from original materials and components. Any resale or other transfer of the product and/or materials
voids this warranty.
For a complete copy of this warranty, please contact customer service by phone or email.
Customer Service
Phone: 855.667.6261
Double-sided foam tape for wood frame only:
Remove double-sided foam tape and put the
frame insert into place.
Tension
Adjuster
Version 37103-65100
Shutter Installation Instructions
Vintage L Frame Outside Mount 4 Sides
CONGRATULATIONS on purchasing the finest shutters in the market.
You can take pride that your purchase will enhance the function and beauty of your home.
Installation Overview
Getting Started
Step 1: Assemble Frame
Step 2: Level the Frame
Step 3: Secure the Frame
Step 4: Attach the Panels
Step 5: Add the Finishing Touch
IMPORTANT: Do not mix panels or frames from other windows. Install one shutter at a time.
Getting Started
Remove the shutter from the package. Do not discard any of the packaging material until the
shutter operates to your satisfaction. Check the diagram below to make sure you have the
necessary parts.
Frame Insert
Frame
Shutter
Panel
Frame Insert
Installation Video
Scan the QR code with
your smartphone to
follow along with video
instructions.
Hinge Pins
Dovetail Key
Hinge Spacers
Frame Insert
Screws for
T-post Connector
(if applicable)
Hinge Pins Frame Screws
Shutter
Panel
1" T-post with panel
Hinge Screws
Hinge Screws for
folds include RTL
(if applicable)