Kohler 12RESNT Operation - Seite 27
Blättern Sie online oder laden Sie pdf Operation für Tragbarer Generator Kohler 12RESNT herunter. Kohler 12RESNT 48 Seiten. Residential/commercial generator sets
Auch für Kohler 12RESNT: Installationshandbuch (40 seiten)
3.4 Spark Plugs
Reset the spark plug gap or replace the plugs with new
plugs as necessary.
1. Clean the area around the base of the spark plug to
keep dirt and debris out of the engine.
2. Remove the spark plug and check its condition.
Replace the spark plug if it is worn or if its reuse is
questionable.
3. Check the spark plug gap using a wire feeler
gauge. Adjust the gap to 0.76 mm (0.030 in.) by
carefully bending the ground electrode.
Figure 3-4 and Figure 3-5.
Figure 3-4 Checking the Spark Plug Gap
Figure 3-5 Adjusting the Spark Plug Gap
TP-6517 4/09
3.5 Air Cleaner Element and
Precleaner
The engine has a replaceable high-density paper air
cleaner element with an oiled foam precleaner. See
Figure 3-6.
Check for a buildup of dirt and debris around the air
cleaner system. Keep this area clean.
Note: Operating the engine with loose or damaged air
cleaner components could allow unfiltered air
into the engine causing premature wear and
failure.
See
1
2
3
4
1--514
5
6
7
1--511
1. Cover knob
2. Air cleaner cover
3. Element cover nut
4. Element cover
Figure 3-6 Air Cleaner Components
Section 3 Scheduled Maintenance, 12 kW Models
586536
5. Foam precleaner
6. Air cleaner element
7. Air cleaner base
27