acaia AC001 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Skalen acaia AC001 herunter. acaia AC001 15 Seiten.

Product Care Information

• You can charge the battery by plugging the USB cable into

any of the power supplies listed below:

• A computer

• A USB wall-charger with an output of 5 volts and 1 amp

• A DC car-charger with an output of 5 volts and 1 amp

• It takes about 1-2 hours to fully charge the battery. Try not to

let the battery completely run out before charging. Charge as

needed.

• Remaining battery power percentage can be viewed via the

Acaia apps.

* Note: Using a non-certified charger could damage your Acaia scale's circuit board or battery.

Turn on scale

Turn on the

Acaia Pyxis.

Tap T button

Make sure the scale

is in the weighing

mode and the unit

is set to 'gram', then

tap 'T' button rapidly.

Scale displays "CAL"

Keep tapping 'T'

button until 'CAL' is

shown on the

display.

Place a weight

Place a 100 g weight

on the scale and wait

until the display shows

'_End_'.

Calibration is now

complete.