AQC MAXIREACH EBD-60302 Benutzerhandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Industrielle Ausrüstung AQC MAXIREACH EBD-60302 herunter. AQC MAXIREACH EBD-60302 16 Seiten. Pivoting extension boom
Seite drucken
8.1
Inspection of goods
The MAXIREACH swing is shipped partly assembled or in sections. Proceed with a visual inspection
upon receiving the material and check for any apparent damage that may have occured on freight.
Generally, shipment includes the boom base, horizontal tubes, spiral duct and flexible hose. Other
optional components such as fume arms, hose reels or hose drops may be delivered on separate
skids.
8.2
Location
1. The wall or column where the swing boom will be installed should be able to support the
weight of such along with the accessories and / or attached equipment. Such support
structure should be level for the swing boom to remain steady when not in use.
2. The span or reach of the swing boom should not be encumbered by overhead cranes, lighting,
jigs or any other equipment.
3. Install the swing boom in a way to have access to the levelling pull rod, friction disks or any
other equipment that may require scheduled maintenance.
4. If the swing boom is supplied with optional equipment, refer to the proper manual for
installation and guidance.
9 ASSEMBLY
8
WARNING!
Installation of swing boom and optional equipment will
require a lifting device. Such lifting device will need to stay
in place and hold horizontal steel tube until all equipment is
installed. It is advised to use a work platform at horizontal
steel tube level to perform work around the unit. Lifting
device will be required for final adjustment and to level
horizontal swing boom appropriately.
Pivoting Extension Boom